Loading page
Soft goods in Cordura nylon 1000D
Cordura nylon 1000D is a proven choice for soft goods: very high abrasion resistance for bags and covers that drag and rub. On a representative soft case at 1,000 pieces it estimates at about $33.00 per part plus $1,070 tooling, with a lead time of 4–6 weeks. Typical tolerance is ±0.125–0.25 in (±3–6 mm) typical.
- Per part
- $33.00
- Tooling
- $1,070
- Lead time
- 4–6 weeks
Price it in 1000D Cordura
Soft case · Soft goods
Order total $34,320
- Tooling
- $1,070
- one-time, spread over the order
- Piece price
- $33.00
- before setup + tooling
- Lead time
- 4–6 weeks
- to first production
Size
Drag a row to adjust · click to type
Width320320 mm
Height220220 mm
Depth9090 mm
Quantity
Price per part falls as volume rises
Exact quantity10001000 pcs
Material
Design checks pass
Open in builderBudgetary estimate for a representative part. Firm quotes come from principals after drawing review.
1000D Cordura vs other soft goods materials
The same soft case at 1,000 pieces, priced in every material the process runs. PP is the lowest all-in cost.
| Material | Per part | All-in | Weight | Tensile |
|---|---|---|---|---|
| Polypropylene (PP) | $29.60 | $31.00 | 233 g | 33 MPa |
| High-density polyethylene (HDPE) | $29.60 | $31.00 | 244 g | 26 MPa |
| Neoprene (CR) | $30.50 | $31.80 | 347 g | 14 MPa |
| Polyester 600D | $30.70 | $32.00 | 355 g | — |
| Cordura nylon 1000D | $33.00 | $34.30 | 293 g | — |
1000D Cordura at a glance
- Density
- 1.14 g/cm³11th pct
- Relative cost
- $$$$$
Bars are relative to the strongest, densest or hottest material in the SSG library. Percentile vs all 48 materials.
Strengths
- Very high abrasion resistance for bags and covers that drag and rub
- High tear and tensile strength for its weight, about 10–12 oz/yd² (340–400 g/m²)
- Polyurethane back coating adds water resistance
- Takes DWR finishes, screen printing and heat-applied labels
- Available in many colors, including military shades
Watch for
- Heavier and stiffer than 500D or 600D fabrics
- Water resistant, not waterproof, unless seams are taped or welded
- Nylon fades and weakens with long UV exposure
- Costs several times generic polyester
Soft goods design rules
0.375–0.5 in (10–13 mm)
Allow enough seam allowance
6–10 stitches per inch
Set stitch density
Bartack or box-X stitch every strap and handle attachment
Reinforce load points
About Tex 70 for light fabrics; Tex 135 for heavy webbing and 1000D
Match thread to fabric
0.25–0.5 in (6–13 mm) over the equipment dimensions
Add ease to covers
Stock #5, #8, or #10 zippers and 1–2 in (25–50 mm) webbing
Use standard hardware
Questions
How much does soft goods in 1000D Cordura cost?
For a representative part (sewn soft case 320 mm × 220 mm × 90 mm, 1 zipper(s), 2 handle(s), 1 pocket(s), 6 mm padding), SSG's estimator gives about $33.00 per part at 1,000 pieces, plus about $1,070 one-time tooling. All-in with tooling and setup that is $34.30 per part. It is budgetary; principals quote firm prices from your drawing.
Is 1000D Cordura a good material for soft goods?
It is when you need very high abrasion resistance for bags and covers that drag and rub and high tear and tensile strength for its weight, about 10–12 oz/yd² (340–400 g/m²). Watch for heavier and stiffer than 500d or 600d fabrics. Of 5 materials run in soft goods, it ranks 5 on all-in cost for the same part.
What tolerance can soft goods hold in 1000D Cordura?
Typical capability is ±0.125–0.25 in (±3–6 mm) typical. Tighter tolerances are possible on called-out features at added cost; specify them on the drawing rather than as a blanket note.
Quote soft goods in 1000D Cordura.
Upload your CAD or start from a template. The DFM check applies the rules above to your geometry.